#Setting up amplitube 3 drivers
#Setting up amplitube 3 pro
#Setting up amplitube 3 Pc

I record guitar tracks multiple times them mult them and put together the best 'master' guitar track, say for the rhythm guitar of verse 1. However, as I'm still relatively new to tracking and mixing studio-quality music, I think I'm missing something here.

#Setting up amplitube 3 pro

Besides Im no pro, I do this for myself and AT4 seems to let me keep playing and recording ideas with the whole pandemic thing going.I have a 2011 macbook pro w/ 16gb RAM to avoid running into problems with CPU usage. But these days the wife working at home and now working on her PHD its not easy to play or record with the real deal. I have an older version of Bias but it never really clicked with me for some reason,AT4 just seems fairly straight forward since Ive always used real amps and mics. I made my own basic template and thats good so far.ДЄs for AT4 and the gain staging, yes I have played around with that a lot to get the sound I like. You can have AT4 setup and replace it with S-Gear or Bias Amp and they behave differently. Also if you have other amp sims, each is different. A number of the presets in AT4 seem pretty hot to me. Adjusting the level going into an amp sim is like having a clean boost in front of the amp. With AT4 if you go in at -6 dB you may need to turn down the input control in AT4. Play around with the level going into the DAW. If you're new to amp sims be aware that, for the most part, they behave like amps. If you use a template to start a new project you should have a number of busses already there - master, metronome, and preview. You may want to play around with setting up CbB. If only one track you might have a send enabled. If you have more than one track another track could be enabled. It's hard to say without seeing what you have in the original.

Ideas so I dont repeat this again for some reason? So I know it has something to do with Cakewalk setting Im just unable to find it.

#Setting up amplitube 3 drivers

In original project I just changed the drivers and the issue was still there. I could start fresh I guess but I'd still like to know what is causing this. So now I know all this will work together, I just cant figure out whats wrong with the original project. Now when I compare the new project with the old one I was having the issue with, the setup looks the same but sounds are completely different. Know I have the AT4 sounds only,no more dry signal bleed thru and now my guitar/AT4 volumes are much louder than the project I had going. Went to audio fx browser and dragged the AT4 plugin into track fx, set my input,made a Master channel and sent track out to Master. Ok I did what you said about starting a new blank project and switched over to the Presonus drivers. TheProChannel is accessible in the console view and inspector.

#Setting up amplitube 3 Pc

When adding a regular DX/VST2 or VST3 plug-in to the ProChannel an FX Chain is added to the PC and the plug-in is placed in it. This is also available in the console view and track inspector strips. The FX Rack (A in the image below) is the area in the track header where you put the amp sim.